Selected Filters
Phoenix Contact
|
Supplier: Phoenix Contact
Subtitle:
Resistance Thermometer Measuring Transducer MINI MCR-SL-PT100-UI-NC
Description:
The 6.2mm wide MINI MCR-SL-PT100-UI... is a configurable 3-way isolated temperature measuring transducer. It is suitable for the connection of Pt 100 resistance thermometers according to IEC 60751 in 2, 3 and 4-wire connection methods. On the output side, the analog standard signals 0...20mA, 4.....
Category: Sensors - Temperature - Temperature - Analog and Digital Output |
|
Supplier: Phoenix Contact
Subtitle:
Frequency Transducer - MINI MCR-SL-F-UI-SP-NC
Description:
The configurable 3-way isolated frequency transducer is suitable for the connection of NAMUR proximity sensors (IEC 60947-5-6 and EN 50227) as well as for sensors with NPN and PNP outputs that generate a frequency signal. The measured values are converted into a linear current or voltage signal. ...
Category: Sensors - Temperature - Temperature - Analog and Digital Output |
|
Supplier: Phoenix Contact
Subtitle:
Resistance Thermometer Measuring Transducer - MINI MCR-RTD-UI-NC
Description:
The configurable temperature transducer with 3-way isolation is suitable for the connection of resistance thermometers and remote resistance-type sensors with 2, 3, and 4-conductor connection technology. The measured values are converted into a linear current or voltage signal. The device can eit...
Category: Sensors - Temperature - Temperature - Analog and Digital Output |
|
Supplier: Phoenix Contact
Subtitle:
Thermocouple Measuring Transducer - MINI MCR-TC-UI-NC
Description:
The configurable temperature transducer with 3-way isolation is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal. The device can either be configured via DIP switches or, with extended functionality, via the S port using the s...
Category: Sensors - Temperature - Temperature - Analog and Digital Output |
|
Supplier: Phoenix Contact
Subtitle:
Current Transducer MCR-S10-50-UI-SW-DCI-NC
Description:
MCR current measuring transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0...10 to 0...50 A, unconfigured.
|
|
Supplier: Phoenix Contact
Subtitle:
Passive Current Transducers for Sinusoidal Alternate Currents from 0...1 A and 0...5 A
Description:
MCR passive current measuring transducer convert sinusoidal alternate currents from 1 and 5 A into analog standard signals of 0…20 mA or 0…10 V.
|
|
Supplier: Phoenix Contact
Subtitle:
Current Transformers
Description:
Set consisting of 2 components: 1 A measuring transducer and a Rogowski coil, length 300, 450 or 600 mm. The measuring coil diameter when installed is 95, 140 or 190 mm. The Rogowski coil is used for AC current measurement for busbars and power lines.
|
|
Supplier: Grayhill Inc.
Subtitle:
Mechanical Encoder
Description:
The 25L series of encoders are inexpensive single deck mechanical encoders designed for human interface terminals. Hex, Gray and Quadrature Code.
|
|
Supplier: Grayhill Inc.
Subtitle:
Mechanical Encoders
Description:
Series 26 rotary encoders are PC mounted mechanical encoders that come complete with a threaded shaft.
|
|
Supplier: Grayhill Inc.
Subtitle:
Adjustable Stops Rotary Switches
Description:
Set and reset stops to limit rotation. All dimensions are the same as for fixed stop switches. Switches are shipped with the stop blades located to limit rotation to 11 switch positions. For continuous rotation, remove both blades. For limited rotation, remove the 2nd (clockwise) blade and move i...
|
