World’s largest selection of electronic components

• eMMC 5.1 protocol with 100/153-ball BGA
• 3D TLC/SLC mode; 5GB to 512GB 
• Eases PCB Design and Enable Low-cost Manufacturing
• AEC-Q100 Grade3/2 and Technical Customization Available 
• Advanced Global Wear Leveling to Enhance Reliability

• 20 standard frequencies from 4MHz to 72MHz
• Wide Temperature Range -40⁰ C to +105⁰ C 
• Low Power Consumption: <3mA (max), 1.8V to 3.3V supply voltage
• Compact Package: 2.5 x 2.0 mm

USB-based, mixed signal oscilloscope with 30+ MHZ bandwidth, 14-bit resolution, and included, easy to use software. Analog Discovery 3 replaces a stack of traditional benchtop instruments.

• Suitable for wireless applications, such as Zigbee^® and Bluetooth^® 
• High frequency stability down to ±10ppm 
• 1210 package size ideal for highly miniaturized circuit boards 
• Wide operating temperatures, up to 125°C

Efficiency and high-performance with reduced design time and board space.  These current sensors can measure DC up to 5 MHz signals and are ideal for sensing in fast control loops and power electronics utilizing fast switching frequencies.

Ambiq raises the bar with the Apollo4 Blue Plus SoC. With one of the lowest dynamic powers for microcontrollers currently on the market, the SoC allows designers of next-generation wearables and battery-operated smart devices to take their innovative products to the next level.

GaN, SiC, and other semiconductor technologies are pushing operating frequencies into the Megahertz range, fueling the need for high-frequency power materials with losses that do not cause issues with efficiency and heat management.

Zelio Logic relays offer users the choice of two ranges: compact versions with fixed configurations & modular versions with extension modules. These smart relays propose a PID function for HVAC applications & a 2G/3G modem communication ability. Zelio logic includes 12 pre-programmed functions.

Bourns’ CSI series ultra-low ohmic current-sense resistors feature a low TCR for operating accuracy over wide temperature ranges and superb long-term stability.

Watertight plastic enclosures with modern rounded look available in ABS and polycarbonate plastic, ideal for housing electronic devices and IoT equipment.

TDK's AEC-Q200 compliant MHQ-HA series of multilayer high frequency inductors deliver a sizable increase in reliability for automotive telematics and V2X applications thanks to a unique internal structure, designed to reduce the chances of an open failure due to cracks in the mount points.

The u-maker box from Weidmüller is the perfect Raspberry Pi housing to build and program smart home devices or automate small applications. The modular u-maker box with its accessories offers secure and smart packaging as well as simple handling and a high level of flexibility in construction.

The AM68 microprocessor from Texas Instruments is designed as a high-performance, highly-integrated device providing significant levels of processing power, image and video processing, and graphics capability. It enables real-time processing of four to eight 2MP cameras with improved AI performance.

onsemi's 1200 V M3S silicon carbide (SiC) MOSFET leverages planar technology for robust operation under negative gate voltage and transient gate voltage excursions. It achieves peak efficiency with an 18 V gate drive but retains satisfactory performance at 15 V.

ATS provides high-performance heat sinks designed for the NVIDIA Jetson modules widely used in autonomous machines and other embedded and edge applications.

Our broad range of bonding solutions includes thin double-sided tapes, adhesive transfer tapes, foam tapes and structural adhesives, offering market-proven solutions designed to address your toughest design challenges, so you can keep your device designs moving forward.

The ECX-31B series comes in a 3.2 x 1.5 x 0.9 mm two-pad industry-standard package. These 32.768 kHz crystals are ideal for high-density circuit boards, wireless devices, real time clocks, and microprocessors, specifically the STM32 processor AN2867.

• Development for Connectivity, Graphics, Machine Learning, Motor Control, Sensors, Touch and Voice 
• Standard form factor and headers
• Easy access to MCU I/Os
• Broad range of supported modules 

TE Connectivity's SNK fuse holder connection terminal blocks offer world-class certifications with a patented PI-spring (push-in and spring mode) connection that allows for fast wiring and faster accessory mounting and are ideal for 5 mm x 20 mm and 5 mm x 25 mm fuses with a 4 mm² cable size.

The ADA4351-2 dual channel amplifier contains two external gain settings per channel. The gain bandwidth product and output stage characteristics natively drive 12 to 16-bit ADCs while it's integrated gain-switching enables maximum dynamic range across wide current input ranges

• Plug-and-play, ready-to-use for E-mobility and industry vehicles
• Very wide input voltage range for 48 V/80 V
• Water and dustproof (IP69K), robust and reliable
• High and extreme constant efficiency

MCE Series of PCB mount medical power supplies offer outputs ranging from 3.3V to 48V, class B conducted and radiated emissions and 4kVAC isolation, and are specifically designed for BF-rated and Class II medical applications.