NMP650 and NMP1K2 series of modular power supplies from MEAN WELL were created to support the need for low volume and custom power requirements in medical and industrial markets.
Originally designed by Cannon engineers in 1952 for aircraft avionics systems, the smaller, lightweight D-Subminiature Interconnect was quickly adopted and used across a number of B2B and B2C industries and applications.
ITT Cannon's KP Connectors are high-density miniature circular interconnects - engineered for the harshest environments.
242 series fuses from Littelfuse are for barrier circuits in intrinsic safety electrical equipment in extremely hazardous locations.
Setting up the configuration or upgrading firmware on a large number of devices is a challenging job for any network professional.
In the first episode of Ted's Tech Files, Ted Phillips -- application engineer at B+B SmartWorx -- takes you through the easy process of installing and setting up the Wzzard HVAC/Compressor Monitoring Starter Kit.
B+B SmartWorx powered by Advantech has announced the release of its Wzzard Mesh Gen 2 Wireless Sensing solution, offering advanced environmental and energy monitoring in both industrial and commercial applications.
Why Choose B+B SmartWorx Wzzard Wireless Sensing Mesh? It's secure, scalable, reliable and easy to install.
Abracon Power-Optimized ClearClock™ 120fs Oscillators for Communications, Networking, RF, Storage and Servers
Our miniature inductors are reliable space-saving options with tiny package sizes starting at 1.6 mm x 0.8mm. They operate under extreme temperature ranges and offer a DCR as low as 23m ohms and a high saturation current of 9.5 amps.
Antennas designed for connectivity in the IoT. Supporting 4G, GPS, LPWA, LoRaWAN, WiFi, & GSM, our antennas connect you to the future.
Pimoroni’s Picade is a desktop retro arcade machine that comes with authentic arcade controls, a high-resolution four-by-three display that's ideal for retro gaming, and a punchy speaker to hear those 8-bit game soundtracks at their best.
Archer Kontrol from Harwin is a range of compact board-to-board 1.27 mm pitch connectors offering designers a robust and flexible connection choice for a wide scope of markets from industrial to IoT and transportation.
ADI battery management devices operating on a single communication bus to precisely measure all cells of a high voltage battery stack, synchronously with stack current, voltage & charge. Real time stack measurements & fault detection are displayed.
When forming batteries, capacity, consistency, and yield depends on precise measurement and control of the charging current and voltage. Constant Current (CC) and Constant Voltage (CV) modes of operation as well as energy recycling is demonstrated.
The LTM8065 module silent switcher regulator powers the AD9625 without the use of additional LDOs, greatly simplifying board layout. It reduces component count and power supply board real estate, and offers higher efficiency.
In-Amp datasheets typically show a graph(s) of the Output Swing vs. Input Common-Mode Voltage, known as a Diamond Plot. This video explains how to use our Diamond Plot tool and shows a real-world example, using data from a post on our EngineerZone.
Delta introduces their line of standard solenoid products to the distribution channel. Delta’s core product knowledge, culminating from decades of magnetic and electromechanical design, has spawned into their product line of solenoid products.
In this episode of TechTalk with Tom Griffin, Tom discusses the new Dialight Light Pipes.
In this episode of TechTalk with Tom Griffin, Tom gives a great overview of Dialight Optopipe Panel Mount Light Pipes.
Keep an eye on your inbox for news and updates from Digi-Key!
Please enter an email address