DRV8830EVM: 1A H-Bridge, 2.75 ~ 6V In with I2C Interface

Summary

The DRV8830 evaluation module consists of a 1A, H-bridge motor driver with a I2C control interface and small number external components that can be used to drive one brushed DC motor or other loads like solenoids. With the DRV8830EVM, designers can quickly and easily evaluate the performance of DRV8830 motor driver in their specific application. The DRV8830 includes an internal reference voltage which is used to set the PWM regulated output voltage controlled by the VSET bits from the serial interface. This EVM operates on power supply voltages from 2.75 V to 6 V.

Features

Low RDSON (450mΩ LS+HS)
EVM includes LED indicator of fault state.
The address pins of the DRV8830 can be configured to respond to one of 9 slave addresses enabling the user to use the same I2C bus for multiple drivers.

Specifications

Manufacturer	Texas Instruments
Category	Motor Control
Eval Board Part Number	296-45691-ND
Eval Board Supplier	Texas Instruments
Eval Board	Normally In Stock
Voltage In	2.75 ~ 6 V
Number of Motors and Type	1, DC Brush Motor
Power / Current Out	1 A
Features	Brake Function Current Limit (Adj. or Fixed) Fault Indication I²C Interface Over Current Protection Short Circuit Protection Thermal Protection Under Voltage Protection, Brown-Out
Component Count + Extras	8 + 16
Application / Target Market	Digital Cameras Portable Devices Printer, Plotter Pumps Robotics
Design Author	Texas Instruments
Main I.C. Base Part	DRV8830
Date Created By Author	2011-03
Date Added To Library	2019-01