STEVAL-IPE004V1: Single Phase Meter with SPI

This metering module can be used to build a Class 0.5 Single-phase standalone or microprocessor based meter with or without tamper detection for power line systems of V = 140 to 300Vrms, Inom / Imax = 2/20ARMS, F = 45 to 65Hz and Tamb = -40 to +85°C.

In standalone mode, a stepper motor display should be connected to pins W5 and W6. A user can select the type of stepper or the constant of output pulse frequency by changing LVS or KMOT configurators respectively.

In Microprocessor based mode, a control board with a microprocessor should be connected to the male connector P1 of the module using a 10-wire flat cable.

Features:

• Single-phase, 0.5 class accuracy guaranteed
  

• LED checking for:
  

• Functioning
  

• No Load Condition
  

• Reverse Energy Direction
  

• Stepper Motor Display Connector
  

• Capacitive Power Supply
  

• SPI Interface Connector:
  

• Active, Reactive Apparent Power consumption
  

• VRMS, IRMS and Line Frequency
  

• Status