Design contains obsolete parts

DAK-14A: 3W, 9V @ 330mA, 85 ~ 265VAC

Summary

Design Accelerator Kits (DAK) provide all of the essential materials to get you started on your next switch mode power supply design. The kits include a fully assembled and tested prototype power supply board, comprehensive engineering report, product samples, unpopulated circuit board, data sheet and other related documentation.

The EP14 is a 9 VDC power supply rated at 3 W. AC input range of 85-265 VAC, 47-64Hz. ±7% accuracy to no-load.

Operating efficiency is 67% worst case at full load across the entire AC line range.
Minimum parts count enables a space conscious design, with outside dimensions 1.2” x 2.0” x 0.75”.

Contents: EP-14 Populated Board and Samples of TNY264P, 266P, 267P, 268P & Unpopulated PCB

Documentation: Engineering Report & TinySwitch-II Data Sheet

* Based off of the obsolete board 596-1000-ND

Specifications

Manufacturer Power Integrations
Category AC/DC and DC/DC Conversion
Sub-Category AC/DC SMPS - Single Output
Eval Board Part Number 596-1000-ND
Eval Board Supplier Power Integrations
Eval Board Board not Stocked
AC Voltage 115 V
230 V
Universal (115 / 230V)
Outputs and Type 1 Isolated
Voltage Out 9 V
Current Out 330 mA
Output Power 3 W
Features Light Load Mode
Over Current Protection
Short Circuit Protection
Shutdown, Enable, Standby
Thermal Protection
Under Voltage Protection, Brown-Out
Efficiency @ Conditions >74%, 120V in, 9V @ 0 ~ 330 mA
>71%, 240V in, 9V @ 0 ~ 330 mA
No-load Input Power @ Voltage 125 mW @ 115 V
250 mW @ 230 V
Switching Frequency 100 or 132 kHz
Internal Switch Yes
Component Count + Extras 23 + 2
Voltage In 85 ~ 265 VAC
Design Author Power Integrations
Application / Target Market Power: AC Adapters
Power: Auxiliary Power Supply
Main I.C. Base Part TNY264
Date Created By Author
Date Added To Library 2017-06

Support Documents & Media

DAK-14A - Main Guide TNY263-TNY268 - Datasheet

Media

DAK_14A_Schematic.JPG DAK_14A_Board.JPG