Design contains obsolete parts

IRDC3895: 1.2V @ 16A, 12Vin, Buck

Summary

The IR3895 is a synchronous buck converter, providing a compact, high performance and flexible solution in a small 5mm X 6 mm Power QFN package.

Key features offered by the IR3895 include internal Digital Soft Start/Soft Stop, precision 0.5Vreference voltage, Power Good, thermal protection, programmable switching frequency, Enable input, input under-voltage lockout for proper start-up, enhanced line/load regulation with feed forward, external frequency synchronization with smooth clocking, smart internal LDO and pre-bias start-up.

Output over-current protection function is implemented by sensing the voltage developed across the on-resistance of the synchronous rectifier MOSFET for optimum cost andperformance and the current limit is thermally compensated.

This user guide contains the schematic and bill of materials for the IR3895 evaluation board. The guide describes operation and use of the evaluation board itself. Detailed application information for IR3895 is available in the IR3895 data sheet.

Specifications

Manufacturer Infineon Technologies
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 1.2 V
Current Out 16 A
Voltage In 12 V
Efficiency @ Conditions >84%, 12V in, 1.2V @ 3 ~ 16 A
Voltage Out Range
Features Current Limit (Adj. or Fixed)
LDO Regulator(s), On-Chip
Power Good Output
Shutdown, Enable, Standby
Soft Start
Synchronizable
Thermal Protection
Voltage Reference
Voltage Tracking
Switching Frequency 600 kHz
Standby Current [Typical] - Not Given
Quiescent Current [Typical] 20 mA
Component Count + Extras 39 + 0
Internal Switch Yes
Design Author Infineon Technologies
Application / Target Market Memory Back-up
Point of Load (PoL)
Servers
Telecom
Standby Current [Maximum] 100 µA
Quiescent Current [Maximum] 23 mA
Main I.C. Base Part IR3895
Date Created By Author 2012-12
Date Added To Library 2014-08