MAX17606SFBEVKIT#: 5V @ 3A, 18 ~ 36V in, Buck

Summary

The MAX17606 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates an isolated 15W synchronous flyback DC-DC converter. The circuit uses the MAX17606 secondary synchronous rectifier driver in a 6-pin SOT23 package, as well as the MAX17597 peak current mode flyback controller in a 16-pin TQFN package.

The EV kit circuit is configured to deliver an isolated +5V output voltage and provides up to 3A of output current. The EV kit is programmed to operate at a 200kHz switching frequency. An optocoupler, along with the transformer, provides the galvanic isolation between input and output, up to 1875VRMS.

Specifications

Manufacturer	Analog Devices Inc./Maxim Integrated
Category	AC/DC and DC/DC Conversion
Sub-Category	DC/DC SMPS - Single Output
Eval Board Part Number	MAX17606SFBEVKIT#-ND
Eval Board Supplier	Analog Devices Inc./Maxim Integrated
Eval Board	Board not Stocked
Topology	Step Down
Outputs and Type	1 Isolated
Voltage Out: Factory Set	5 V
Current Out	3 A
Voltage In	18 ~ 36 V
Efficiency @ Conditions	>86%, 18V in, 5V @ 0.6 ~ 3 A >85%, 24V in, 5V @ 0.8 ~ 3 A >82%, 36V in, 5V @ 1 ~ 3 A
Voltage Out Range	- Fixed
Features	Current Limit (Adj. or Fixed) Shutdown, Enable, Standby Soft Start Thermal Protection Under Voltage Protection, Brown-Out
Switching Frequency	200 kHz
Standby Current [Typical]	- Not Given
Quiescent Current [Typical]	320 µA
Component Count + Extras	72 + 2
Internal Switch	No
Design Author	Maxim Integrated Products
Application / Target Market	Power: Auxiliary Power Supply
Standby Current [Maximum]	- Not Given
Quiescent Current [Maximum]	450 µA
Main I.C. Base Part	MAX17606
Date Created By Author	2015-11
Date Added To Library	2018-02