ReferenceDesignLibrary

Refine Search

Eval Board Application / Target Market Voltage In Cell Type Voltage Out Current Out Features Design Author
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (19)

19 Results - Page 1/2 |< < 1 2 > >|

MAX17710EVKIT#(1): Thin Film Batt Energy Harvesting Charger

Manufacturer: Maxim Integrated

The MAX17710 evaluation kit (EV kit) is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX17710 energy-harvesting charger and protector. The EV kit features the THINERGYM micro-energy cell (MEC) from Infinite Power Solutions, Inc. (IPS), a solid-state, rechargeable, thin-power solution. Solar cells are installed on the EV kit as the …

View Design

DC1584A(#2): 1Cell, Li-Ion/Polymer, 50mA, 4 ~ 4.2V

Manufacturer: Linear Technology/Analog Devices

The LTC®4070 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. The 450nA to 50mA operating current makes charging possible from previously unusable sources. With the addition of an external pass device, shunt current may be boosted to 500mA. Stacked cell high voltage battery packs are inherently balanced with shunt charging.

View Design

BQ25504EVM-674(#1): EH Low Power Boost Charger

Manufacturer: Texas Instruments

The bq25504 is the first of a new family of intelligent integrated energy harvesting Nano-Power management solutions that are well suited for meeting the special needs of ultra-low power applications. The product is specifically designed to efficiently acquire and manage the microwatts (µW) to miliwatts (mW) of power generated from a variety of DC sources like photovoltaic (solar) or thermal elec…

View Design

BQ24210EVM-678: Solar Charger, 1 Cell,Li-Ion 800mA

Manufacturer: Texas Instruments

The bq24210/2 series of devices are highly integrated Li-ion linear chargers devices targeted at space-limited portable applications. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters. The input voltage regulation loop with programmable input voltage regulation threshold make it suitable for charging from alternative power sources, such as solar…

View Design

MAX17710GB20EVKIT#: 0.3~6V In, 1.8, 2.3, 3.3V out

Manufacturer: Maxim Integrated

The MAX17710GB20 evaluation kit is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX17710GB energy-harvesting charger and protector.

View Design

IPS-EVAL-EH-01: Thin Film Battery, Solar Charger

Manufacturer: Maxim Integrated

This user manual describes the configuration and use of the IPS-EVAL-EH-01 Energy Harvesting Evaluation Kit. This kit allows the user to efficiently store harvested energy in the board mounted, industry leading THINERGY® MEC201 Micro-Energy Cell (MEC) available from Infinite Power Solutions, Inc. (IPS).

View Design

STEVAL-ILL022V1: 80W Batt Charger w/ LED Driver

Manufacturer: STMicroelectronics

The solar-LED streetlight controller consists of one 80 W battery charger and one 25 W LED driver. During the daytime, when there is sufficient sunlight, the charger converts the electricity from the solar panel and charges the battery. At nighttime, the battery powers on the LED lamp as streetlight.

View Design

ADP5092-1-EVALZ: 3.3V @ 150mA, 0.38 ~ 3.3 Vin, Solar

Manufacturer: Analog Devices Inc.

The ADP5091/ADP5092 is a 2-channel ultralow power energy harvesting PMU in a compact 4 mm × 4 mm LFCSP package.

View Design

STEVAL-ISV021V1: 0.75 ~ 18V in, 2.6 ~ 5.3V @ 70mA, Li-Ion

Manufacturer: STMicroelectronics

The STEVAL-ISV021V1 is a demonstration kit which consists of a complete energy harvesting module based on the SPV1050 ULP energy harvester and battery charger.

View Design

DC1568A(#2): 2 Cell, 8.2V, 2A Max, Solar

Manufacturer: Linear Technology/Analog Devices

Demonstration Circuit 1568A is a 2A Monolithic Multi-Chemistry battery charger (Li-Ion/Polymer, LiFePO4, SLA, NiMH/NiCd) for solar power applications featuring the LT3652EDD. The LT3652 is a complete mid-power Li-Ion battery charger that can operate over a wide input voltage range.

View Design
19 Results - Page 1/2 |< < 1 2 > >|