ReferenceDesignLibrary

Refine Search

Eval Board Topology Outputs and Type Voltage Out Current Out Voltage In Efficiency @ Conditions Features Switching Frequency Component Count + Extras Design Author Internal Switch Main I.C. Base Part
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (26)

26 Results - Page 1/3 |< < 1 2 3 > >|

LM5070HE EVAL: POE, 3.3V @ 3.4A Out

Manufacturer: Texas Instruments

The LM5070 HE (High Efficiency) evaluation board is designed to provide an IEEE802.3af compliant, Power over Ethernet (PoE) power supply.

View Design

EVALPM8800A-HP: POE 3.3V @ 6A, 5V @ 4A

Manufacturer: STMicroelectronics

This document details the characteristics and performances of the PM8800 demonstration kit which has been designed to cover a broad range of power over Ethernet (PoE) applications. PM8800 is a highly integrated device embedding an IEEE802.3af compliant powered device (PD) interface together with a PWM controller and support for auxiliary sources.

View Design

DC1145B: 12V @ 0.9A POE, 37 ~ 57V in

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 1145B, featuring the LTC®4267, provides a complete IEEE 802.3af Powered Device (PD) interface and isolated 12V at 0.9A power supply solution for use in Power over Ethernet (PoE) applications. An optional connection is included for a 12V auxiliary supply on the secondary side that disables PoE when present.

View Design

DC2093A-A: 90W, 23 ~ 60V in, POE Controller

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 2093A features the LT®4275, a fourth generation powered device (PD) controller and the LT4321, an ideal diode bridge controller for Power over Ethernet (PoE) applications.

View Design

NCP1081SPCGEVB(#2): 1.25 ~ 50V @ 2.5A, 36 ~ 57V in

Manufacturer: ON Semiconductor

The NCP1081SPCGEVB implements a PoE power splitter that converts the voltage on the Ethernet cable to a lower voltage. The board is equipped with 2 RJ45 connectors, one connector serves as the data and power input and the other connector is the data output. Ethernet data is untouched by the board and simply forwarded.

View Design

SI3406FBC3-KIT: Non-Isolated, Class 3, 15W 802.3af/at POE Controller

Manufacturer: Silicon Labs

The Si3406 non-isolated Flyback topology based evaluation board is a reference design for a power supply in a Power over Ethernet (PoE) Powered Device (PD) application with a maximum power output of class 3 (15.4 W)

View Design

TPS2372-4EVM-006: Evaluation Module for IEEE802.3bt PoE PD Applications

Manufacturer: Texas Instruments

The TPS2372-4 contains all of the features needed to implement an IEEE802.3bt (draft) (Type 1-4) powered device (PD). The low internal switch resistance allows the TPS2372-4 to support high power applications up to 90 W.

View Design

DAK-86: POE, 6.6 W, 3.3V @ 2.0A, 33 ~ 57 V in

Manufacturer: Power Integrations

A flyback topology was used to minimize circuit board size, parts count and cost. This topology also provides excellent operating efficiency across the input voltage range.

View Design

TPS23754EVM-420: 25W, 5V @ 5A, 30 ~ 57V

Manufacturer: Texas Instruments

TPS23754EVM-420 contains evaluation and reference circuitry for the TPS23754. The TPS23754 is an IEEE 802.3at compliant powered device (PD) controller and power supply controller optimized for isolated converter topologies. TPS23754EVM-420 is targeted at 25W, synchronous flyback converter applications.

View Design

LM5070AE EVAL: POE, 3.3V @ 3.3A Out

Manufacturer: Texas Instruments

The LM5070 AE (Area Efficient) evaluation board is designed to provide an IEEE802.3af compliant, Power over Ethernet (PoE) power supply.

View Design
26 Results - Page 1/3 |< < 1 2 3 > >|