ReferenceDesignLibrary

Refine Search

Eval Board Purpose Range Sensing Method Voltage In Features Design Author Component Count + Extras
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (19)

19 Results - Page 1/2 |< < 1 2 > >|

AS5145B-EK-AB-STM1.0: 360º Magnetic Position Sens

Manufacturer: ams

The AS5145B Eval-Kit is designed to adapt standard size stepper motors with a contactless rotary position sensor. Rotation of the magnet holders is sensed by the rotary position sensor, soldered on the PCB board.

The AS5145 is a contact less magnetic rotary encoder for accurate angular measurement over a full turn of 360 degrees.

It is a system-on-chip, combining integra…

View Design

AS5048B-EK-AB-STM1.0: Motor Position, Hall Effect

Manufacturer: ams

The AS5048 Eval-Kit is designed to adapt standard size stepper motors with a contactless rotary position sensor. Rotation of the magnet holders is sensed by the rotary position sensor, soldered on the PCB board.

View Design

EVAL-CN0326-PMDZ: pH Sensor with Temperature Compensation

Manufacturer: Analog Devices Inc.

This design provides a complete solution for pH sensor with temperature compensation. The circuit has three critical stages: the pH probe buffer, the ADC, and the digital and power isolator.

View Design

MAXREFDES117#: Heart Oximetry Monitor, 2 ~ 5.5V in, Pulse Oximeter Sensor

Manufacturer: Maxim Integrated

The MAXREFDES117# reference design is a low power, optical heart-rate module complete with integrated red and IR LEDs, and a power supply.

View Design

LDC1000EVM: Inductance Sensing, 4.7 ~ 5.5V in

Manufacturer: Texas Instruments

The LDC10xx Evaluation Module is designed to provide an example LC tank and coil structure application which interfaces to a host computer. The module can be used independently of the GUI by the on-board embedded LED, which demonstrates threshold detection.

The EVM includes an example PCB sensor which is a 2 layer, 23 turn, 14mm diameter inductor with a 100pF 1% NP0 capacitor connect…

View Design

MCP3421DM-WS: 2kg Weight Scale w/ USB & LCD

Manufacturer: Microchip Technology

The MCP3421 Weight Scale Demo Board works with the LabVIEW™ Graphical User Interface (GUI) PC Software. This demo board demonstrates how to use the MCP342118-bit Delta-Sigma ADC for weight scale applications.

View Design

LCMXO2-4000HE-DSIB-EVN: 2x Image Sensor Interface

Manufacturer: Lattice Semiconductor Corporation

Building off Lattice’s broad support for bridging image sensors to parallel buses for ISP (Image Signal Processors), Lattice has designed a new sensor interface board. There are two purposes for the MachXO2™ Dual Sensor Interface Board (DSIB). First, the DSIB confirms that sensor bridges can be implemented in the low cost MachXO2 device. Second, the DSIB platform demonstrates two image sensors be…

View Design

AS5048A-EK-AB-STM1.0: Magnetic Position Sensor

Manufacturer: ams

The AS5048A evaluation kit is designed to adapt standard size stepper motors with a contactless rotary position sensor for easy and fast evaluation of the IC in the application. The evaluation kit includes the PCB with soldered IC, 4 magnet holders with different shaft diameters and the allen key. The 4 distance bolts and the motor are not included. On the connector you get the SPI Serial Periphe…

View Design

MSP430-PIR: Low Power Smart PIR Sensor

Manufacturer: Texas Instruments

Application note SLAA283 from Texas Instruments was used to create MSP430-PIR, there are a few differences between the TI schematic and ours - our schematic support both the TI and the OLIMEX SBW JTAG layout; we ship the boards with SMT jumpers which are shortened for the OLIMEX JTAG layout so if you use the TI JTAG, you should move the jumpers to TI positionMSP430-PIR board use ultralow-power mi…

View Design

EVAL-CN0271-SDPZ: Thermocouple Interface, 5V in

Manufacturer: Analog Devices Inc.

EVAL-CN0271-SDPZ is a complete thermocouple signal conditioning circuit with cold junction compensation followed by a 16-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC). The AD8495 thermocouple amplifier provides a simple, low cost solution for measuring K type thermocouple temperatures, including cold junction compensation.

A fixed gain instrumentation amplifier in the AD84…

View Design
19 Results - Page 1/2 |< < 1 2 > >|